Sticks, Sticks and a few Logs

Sticks, Sticks and a few Logs I have a process for clearing the sticks and logs from the ground. Walk up and down the rows with a shovel, stick or other implement and stab it into the soil. If it hits something start digging, if not move to the next spot. Each day, Pauline and Read More

Mike_blog

Sticks, Sticks and a few Logs

I have a process for clearing the sticks and logs from the ground. Walk up and down the rows with a shovel, stick or other implement and stab it into the soil. If it hits something start digging, if not move to the next spot. Each day, Pauline and I clear anywhere from several hundred pounds to a ton of sticks and logs. They range in size from a foot long to 10 feet, with diameters up to 2 feet.

The goal is to till 5 acres before spring. It has taken about two weeks to till ¾ of an acre. I had expected to be done by Christmas, this looks unlikely.

I also had to figure out what to do with the logs and sticks that we have collected. I spoke to my neighbors and they all suggested that I get a burn permit and light it up! I had read about a state program for hauling and chipping of green waste, but evidently that program ended a few years ago.

The fire chief was more than happy to exchange a burn permit for $25 dollars. I thought the permit would be good for a single use, but I was wrong. I had until May 1st, 2017 to burn my logs and sticks.

My first burn was pretty pathetic. It took me several hours to get the fire going satisfactorily and I was ill prepared to deal with fueling the blaze sufficiently. At the end of the day, I only burned a couple hundred pounds of wood, less than a day of collections.

My second attempt was much improved. I watched a few videos on YouTube, and followed the instructions. After about an hour I had built a blaze that burned wood faster than I could feed it by hand. After another hour of throwing wood on the fire, I had the ingenious idea of using the front end loader on the tractor to dump several hundred pounds of sticks and logs on the fire at once. By the end of the day, I had burned several thousand pounds of wood.

The third attempt was even more ambitious. Instead of loading the wood in the front end loader and dumping it on the fire, I positioned a number of piles so they could be pushed onto the fire.

The was by far the most successful burn that I had.

It started raining a lot this week. After the drought over the last few years, everyone is glad to see some rain.

Farm implements are heavy

Farm implements are heavy After watching a number of YouTube videos, I figured out how to drive the Kubota. Not hard, thankfully it has an automatic transmission (Hydro-Static Transmission in farm speak). Now that I could drive the tractor, I wanted to start preparing the land for spring planting. There is a lot of discussion Read More

Mike

Farm implements are heavy

After watching a number of YouTube videos, I figured out how to drive the Kubota. Not hard, thankfully it has an automatic transmission (Hydro-Static Transmission in farm speak).

Now that I could drive the tractor, I wanted to start preparing the land for spring planting. There is a lot of discussion on the internet about if, when and how much a farmer should till. In my case, the soil is Cole Clay Loam, which gets a very hard when dry. California has experienced 5 years of drought, the soil was very, very hard and needed to be churned up. My plan was to till once in the winter and then a final time in the spring. The final step would be constructing the raised beds for planting the berry bushes.

Getting a 3 point, PTO driven implement on a tractor requires much patience and a little luck. I watched several YouTube videos before starting. The big problem with farm implements is that they are very heavy. The tiller weighs in at a hefty 1500 pounds, meaning you have to move the tractor to connec the tiller, because you are not going to move the tiller.

The connection process goes something like this:

  1. Back up the tractor to the implement
  2. Move the tractor forward, back, left, right an inch at a time, until your three control arms on the tractor align with the holes on the implement
  3. Connect the adjustable control arm to implement
  4. Hopefully other arms align to holes, if not, go back to (2)
  5. After three control arms are secure, connect drive shaft (PTO).

I took me two and a half hours to get the tiller connected to the tractor.

I was ready to start my first farmer task, tilling the soil. First, let’s consider the ground that I am about to till.

The 10 acre parcel had been part of a large walnut orchard. The trees had not been tended for several years and many had died in the drought. We had the orchard removed in 2015. The team that removed the orchard focused on the stumps and roots. There were still a few partially burned stumps dotted on the property, but not much else visible to the naked eye.

I moved the tractor to tilling position. Lowered the tiller, turned it on and began my slow movement forward.

***BAM**, ***Grind****, ***Crunch**** I had gotten no more than 10 feet and the tractor ground to a halt. Pieces of wood exploded from the tiller. Oh dear! I got off the tractor and opened the back gate and saw that there was a 4 foot log jammed into the tiller blades. Not to be deterred, I cleared the log and started again.

***BAM**, ***Grind****, ***Crunch**** I made it 6 feet this time.

I walked in front of the tractor for several feet, but did not see any logs or sticks. What was going on? I grabbed a shovel and started poking it in the ground. After ten or so pokes, I realized that just under the surface, there were many, many logs.

Tilling is done for now, I need a new plan

Aren’t all tractors the same?

Buying a tractor My wife and I have left our jobs and moved to Northern California to become Raspberry farmers. I have no background in agriculture or farming, in fact the totality of my knowledge of the subject comes from books and YouTube videos. I had read about small scale market farmers not owning a Read More

Mike

Buying a tractor

My wife and I have left our jobs and moved to Northern California to become Raspberry farmers. I have no background in agriculture or farming, in fact the totality of my knowledge of the subject comes from books and YouTube videos.

I had read about small scale market farmers not owning a tractor. I thought about saving money by foregoing the purchase of a tractor. Fortunately, I have an uncle who has experience with farming, he actually laughed when I told him I did not need a tractor. Not only did he tell me to get a tractor, he also said I should, “get the largest tractor you can afford.”

Tractors are rated by horsepower, the more horsepower the engine can output the bigger implements you can tow, larger loads you can lift and etc. Sizing a tractor for your needs can be difficult, especially if you are like me and have no experience with tractors.

After talking and emailing my uncle a number of times, we figured I needed a tractor that had a tiller, a front end loaded and an auger (post hole digger). He suggested that I stick with Kubota, since they are known for small farm/vineyard tractors, focusing on the “L” or “M” series, since they are geared for general use, rather than a specific task.

After figuring out what I needed, I started looking at used tractors being sold locally. I quickly found out that tractors hold value, at least in the minds of their owners. It was not uncommon for me to find used tractors for MORE than the original purchase price. Get much older than 20 years and it is sold as a “classic.” Classic tractors evidently are worth more than some houses. After reviewing the used tractor scene, I decided I should call a local dealer. Local being about 2 hours from the house. I thought talking to a tractor salesman would be like talking to a used car salesman. I was pleasantly surprised that after one phone call and a couple of emails, I was able to get an off lease 33 hp tractor with full warranty and all the attachments for less than a used 20 year old tractor with no attachments. They even delivered.

If you are interested in the make and model, it is a Kubota L3301. The orange is nice, I definately will not lose it.

After the dealer dropped off the tractor, I realized I did not even know how to turn it on….This is going to be fun.